How to calculate a square meter of house paint? 90% of people unknown

Before proceeding with the paint, the owner should pay close attention to carefully calculating the area to be painted to avoid wasting, excess, economically expensive paints. So, do you know how to calculate your square meter? Want fast, easy but still accurate, let’s refer to the following article!

>> See now how to calculate this extremely simple house paint if you want to save money.

Calculate the area of ​​paint in the house
Indoor paint area = floor surface area x number of floors.

– For tube house designs, many rooms have 4 walls, and the ceiling area => Coefficient 4.5

– If your house has many rooms but the number of windows is moderate => Coefficient 4.

– For grade 4 houses, the door system is small, with ceilings => The appropriate coefficient is 3.5.

– A 4-storey house with few doors without ceiling => Coefficient 3

You need tools to accurately measure the size of your home

Calculate the area of ​​paint outside the house
For outdoor, the calculation of square meter of house painting is a bit different like:

– Coefficient from 1.2 to 1.8 depending on the level of the plan to give the appropriate coefficients.

Or you can also directly measure the width and height of the wall from which to get the area just measured minus the area of ​​the door (the part without paint).

Square meters of house paint

You should measure the area of ​​the entire house and then subtract the area of ​​the door

To save the best cost in addition to calculating the area to paint the homeowner also needs to calculate the amount of paint for his home. The following will be suggestions to help you calculate the amount of paint in the most reasonable way.

When painting the house to ensure durability as well as high aesthetics, the homeowner needs to paint at least 2 coats.

– After calculating the square meter of the house, the owner has just calculated by multiplying the number of m2 / l by the number of liters of paint needed to paint his house. Usually according to home painting experience, an 18 liter paint bucket will paint about 60-70 m2 (2 coats).

Leave a Reply

Your email address will not be published. Required fields are marked *

Đăng ký làm đại lý